Master Pro service team beside a van and cleaning equipment

MASTER PRO / PROJECT GALLERY

See our work.
Picture your project.

Explore our duct cleaning, fireplace repairs and chimney projects, including custom caps made by hand. Let the pictures speak for themselves.

For custom projects, plan for 7–14 days. We confirm your schedule after reviewing the work and materials.

Negative-pressure equipment connected inside a home
Take a closer look

MASTER PRO WORK / AIR DUCT

See duct cleaning
from the inside.

Watch the cleaning process and the view inside the duct after the work.

Cleaning tool inside an air duct during the supplied work video
Air duct work video1:03
After photograph looking into an air duct

FROM THE CLIENT WORK ARCHIVE

See the difference a service visit can make

Compare visually matched views of the same pictured area. Work and results vary; repairs and installations have their own scope.

Client photograph of the matching blower wheel with visibly cleaner bladesAfter
Client photograph of a blower wheel with visible deposits on its bladesBefore

AC Blower Motor Cleaning

We removed buildup from the blower assembly and wheel inside the AC unit.

About this service
Client photograph of the matching attic area with a rigid metal vent pipeAfter
Client photograph of a flexible vent pipe running through an atticBefore

Duct Vent Replacement

We replaced the flexible pipe and incorrect installation with rigid metal ductwork installed to the applicable code requirements.

Discuss this work
Client photograph of the matching brick fireplace with glass doors and a changed log arrangementAfter
Client photograph of the earlier fireplace log arrangement behind a mesh screenBefore

Gas Logs, Fireplace Update + Glass Door Installation

We updated the gas-log arrangement and installed glass doors in the existing brick fireplace.

About this service
Client photograph of the matching metal damper chamber with clearer visible surfacesAfter
Client photograph of deposits around the fireplace throat and damper areaBefore

Chimney Damper Area Repair

The damaged damper would not open. We replaced it and restored the opening into the chimney passage.

About this service
Client photograph of the matching tiled laundry area with a recessed dryer connection boxAfter
Client photograph of lint and debris below an open dryer wall connection during workBefore

Dryer Vent Connection Work

The vent ended too far inside the wall to connect the dryer hose. We opened the wall, adjusted the framing and vent connection, then repaired and finished the drywall.

About this service
Client photograph of the matching firebox with a dark wall finish and cleared baseAfter
Client photograph of soot marks and debris in a brick firebox before workBefore

Firebox Panel Replacement

We replaced the cracked and damaged firebox panels and finished the interior.

About this service
Client photograph of the matching rectangular chimney passage with a more even visible surfaceAfter
Client photograph looking through a rectangular chimney passage with rough visible depositsBefore

Smoke Chamber Repair

The damaged smoke chamber was allowing smoke odors into the home. We repaired the chamber and restored its interior surface.

About this service

MORE PROJECT COMPARISONS

See the change for yourself.

Move the divider to compare each project before and after the work.

After: air duct cleaningAfter
Before: air duct cleaningBefore
BEFORE / AFTER

Air Duct Cleaning

Heavy buildup inside the duct before cleaning, followed by the cleaned interior.

About this service
After: firebox panel repairAfter
Before: firebox panel repairBefore
BEFORE / AFTER

Firebox Panel Repair

We restored the damaged firebox interior and its panels, then cleared the hearth.

About this service
After: chimney rebuildAfter
Before: chimney rebuildBefore
BEFORE / AFTER

Chimney Rebuild

We rebuilt the damaged exterior brickwork and finished the chimney top.

About this service
After: chimney siding repairAfter
Before: chimney siding repairBefore
BEFORE / AFTER

Chimney Siding Repair

We replaced the damaged siding and corner trim, then finished and painted the chimney exterior.

About this service

Exterior restoration projects have their own scope and are not included in basic chimney cleaning. Comparisons document the pictured areas of individual projects, not concealed condition or a promised outcome for every home. Results and access vary.

CHIMNEY PROJECT

Installation of
Chase Cover

We took measurements, fitted and installed a chase cover on top, replaced the cap, and painted the entire chimney exterior.

Fitted metal cover and raised cap above a sided chimney chase
Custom metal chimney cap being assembled in the workshop

THE TOOLS BEHIND THE WORK

From dust collection
to UV installation.

See the vacuum equipment, rotating brush and UV installations used in our work.

Negative-pressure machine connected to an overhead grille
AIR DUCTS

Negative pressure, at work.

Our vacuum machine draws in and collects loose dust and debris from accessible ductwork.

How the basic service works
CLEANING METHOD

Follow the Snake Brush inside.

A rotating brush works inside the accessible duct path. Snake Brush is a separately quoted option, not automatically included in basic air duct cleaning.

Ask about this method
UV light installed beside HVAC components
AIR SYSTEM INSTALLATION

See UV installations up close.

Add targeted UV-C care inside a compatible AC unit as part of your home’s indoor-air care. Ask how it works alongside fresh-air ventilation, filtration and cleaning. Installation is quoted for your system.

Discuss your system

UV equipment does not replace cleaning or correcting moisture problems. The gallery shows different service scopes. Pictured equipment and installations are not automatically included in the basic cleaning price.

LET’S TALK ABOUT YOUR HOME

Ready to plan
your home’s next project?

Send your ZIP code and tell us which service needs attention.

Call nowWhatsApp